Features of 37m Concrete Pump Truck
- High strength steel plate, yield strength is several times higher than normal materials, R-shape and M-shape folding boom system.
- Hard alloy glasses plate with long cutting life and easy maintenance.
- Main parts imported from Germany or Italy. Materials has higher strength and longer service life.
- Large capacity hopper. There is no dead angle and it is easy to clean.
- The split piston made of polyurethane is resistant to wear and can ensure pumping requirements.
- Equipped with wireless remote control device with light weight. It is convenient to carry. The boom can be accurately placed with the handle.
- Large diameter conveying cylinder with good suction and large pumping displacement.
- The key components of power switching, transmission driving and pumping operation adopt gear splitter box technology and German imported pump set.
- High pressure water tank makes it more convenient to clean the machine.
- Electrical control box for all imported components and CPU control modules are all products of Siemens.
- Using German Gates products to ensure the safety of hydraulic system.
- Professional and advanced spray paint technology can extend its life and make the appearance more beautiful.
- Multitandem valve is also imported.
- When hydraulic oil is sucked into the hydraulic oil pump from the oil tank, it passes through the filter to purify and then enters the hydraulic oil pump.
Technical Parameter of 37m Concrete Pump Truck
|Pumping System||Max Theoretic Output (High/Low Pressure) (m3/h)||160|
|Max Theoretic Concrete Output (MPa)||8|
|Rated Working Pressure (MPa)||32|
|Pumping Frequency (High/Low Pressure) (min-1)||26|
|Hopper Capacity (L)||600|
|Feeding Height (mm)||1600|
|Hydraulic System Type||Open loop|
|Distribution Valve||S valve|
|Oil Cylinder Diameter x Stroke (mm)||Φ130X1900|
|Concrete Cylinder Diameter x Stroke (mm)||Φ260X1900|
|Hydraulic Oil Cooling||Air cooling|
|Recommended Concrete Slump (mm)||120~230|
|Max. Aggregate Dimension (mm)||40|
|Placing Boom||Structure Type||37X-4Z|
|Max. Placing Height (m)||37|
|Horizontal Distance (m)||34|
|Placing Depth (m)||21|
|Slewing Angle (°)||365|
|Pipe Diameter (mm)||125|
|End Hose Length (mm)||3000|
|Min. Height of Opening Placing Boom (mm)||8500|
|Outriggers Span (Front x Rear x Side) (mm)||6200x7200x8120|
|Chassis and the Whole Machine||Chassis Model||ZZ5307N4647C|
|Wheel Base||4600+1350, 4575+1400|
|Engine Power (kw)||247|
|Oil Tank Cubage (L)||400|
|Tail Gas Exhaust Standard||China IV|
|Overall Dimensions (mm)||12000x2490x3850|
|Others||Lubrication Mode||Automatic lubrication|
|Oil Tank Volume (L)||600|
|Control Mode||Manual + remote control|
|Maximum Water Pressure (Mpa)||0.7|
|Water Tank Volume (L)||500|
|Pipe Cleaning Mode||Water cleaning/dry cleaning|